Sercel VE432 DPG - Page 35

SOFTWARE INSTALLATION
SOLARIS INSTALLATION OR RE-INSTALLATION
0311385 Issue : April 1999
3-3
• In the "System Type" window,
- standalone should be activated (by default).
- Click "Continue".
•In the "Software" window.
- End user system support should be activated (by default).
- Click "Customize"
- In the "Customize Software" window :
. Use the scrollbar to access Terminal Information. This button
must be activated :
Terminal Information
. Likewise, the Point-to Point Protocol button must be activated
:
Point-to-Point Protocol
. Click "OK".
. Click "Continue"
• In the "Disks" window :
- In the "Available disk" list box, click the desired disk
Cxtxdx bootdrive xxx Mb
- Click "Add"
- Click "Continue"
• In the "Preserve Data" window ;
- Click "Continue"
• In the "Automatically Layout File system" window :
- Click "Auto Layout"
- The following buttons should be activated (by default) :
/
swap
/usr
- Click "Continue"