Sercel VE432 DPG - Loading a Custom Sweep File to Adpg

CUSTOM SWEEPS
Loading a Custom sweep file to a DPG
0311385 Issue : April 1999
4-2
Loading a Custom sweep file to a DPG
After creating a Custom sweep file you have to move it to the HCI, via a floppy disk.
You may put it into the /tmp directory or any directory beginning with /users/
(e. g. /users/sn388/ve432/). The file name should be in DOS format, i. e.
8 characters max for the name, 1 dot, 3 characters max for the extension (e. g.
custom1.asc).
Run the toolsVeHci program in the console window on the HCI. See page 6-1.
Choose option 6 (Load custom file to PCMCIA).
The program will ask for the file name and its path. Then the file is transferred to the
DPG. With the reference it receives, the DPG performs the necessary format
conversion and stores the result to the PCMCIA card without changing the file name.
For example the /users/sn388/ve432/custom1.asc file will be saved as
custom1.asc in the PCMCIA card.
Generate a PCMCIA card containing the custom sweep file for each DSD and each
DPG to be used.