toolsVeHci SOFTWARE LOADING UTILITY
Loading software to a DPG or DSD
0311385 Issue : April 1999
6-2
· Load DPG slave file to PCMCIA. Used to load the latest version of Slave
DPG software to a PCMCIA card. You have to insert a PCMCIA card into the
DPG.
¸ Load DSD file to PCMCIA. Used to load the latest version of DSD software
to a PCMCIA card. You have to insert a PCMCIA card into the DPG.
¹ Format PCMCIA. Used to format the PCMCIA card inserted into the DPG.
º Load DPG file to PCMCIA. Used to load DPG boot ROM software to a
PCMCIA card. DPG boot ROM software may be necessary, for example, if
you wish to use a DVC board in a DPG.
» Load custom file to PCMCIA. Used to load a file containing custom sweep
samples to a DPG. See page 4-1.
With any option, the DPG returns message in the Console window when the
command is complete.
WARNING : Some commands may take a while to execute. Be patient.
To Next Page
Loading...