www.servware.com
800•768•5953
Service, Installation & Care Manual
IMPORTANT
FAILURE TO INSTALL THE PRESSURE REGULATOR WILL VOID
YOUR WARRANTY.
MODEL
Combustible Non-combustible
Rear Sides Rear Sides
Fryer Gas Cabinet
10" 6" 0" 0"
8
02. EQUIPMENT INSTALLATION
Clearances
The appliance area must be kept free and clear of all combustibles.
Rating Plate
Information on this plate includes the model, serial number, BTU/h input of the
burners, operating gas pressure in inches WC, and whether the appliance is oriced for
natural or propane gas. When communicating with factory about a unit or requesting
special parts or information, rating plate data is essential for proper identication.
2.2 Recommendations Before Installation
Before installing the gas supply system, observe the pipes and ttings, check
the components for dirt, clean internally with compressed air to eliminate
possible particles, and prevent burners and valves from becoming clogged.
After cleaning, use thread sealant to connect the equipment to the gas network. For
correct application, avoid concentrating the compound on the rst two threads of the
pipe, otherwise it may generate particles that will clog the system injectors.
2.3 Installation - Gas Standards and Codes
To Next Page
Loading...