Switched PRO2 – User Guide
Using the Web Interface • 64
sentry4OIDTree.txt
The Sentry4OIDTree is the new OID tree structure that identifies PRO2 data objects for SNMP network monitoring.
The Sentry4OIDTree is not backward-compatible with the Sentry3OIDTree.
Continue to use the Sentry3OIDTree for SNMP network monitoring of PDU products, and use the Sentry4OIDTree
exclusively for PRO2 products.
config.bak (or *.bak)
This configuration backup file (firmware version 8.0x or later), when uploaded, restores a PRO2 unit, including
network, SNTP, and FTP settings.
User-configuration values are restored, except:
• DHCP/IP values in network settings
• SNAP password
• SNMP sysName (unless restoring to the same unit from which the backup came, based on NIC serial
number, in which case the sysName is restored)
• User-loaded x-509 certificate and key
• Factory-configuration values, for example NIC serial number and profile, are not backed up or restored.
To Next Page
Loading...