Switched PRO2 – User Guide
Using the Web Interface • 74
System > Phases
The Phases page configures multiple threshold levels for phase voltage and power factor, plus threshold hysteresis
(for AC products only). The page also sets sets SNMP Trap and Email notifications for phase events.
For dynamic monitoring of phase status, voltage, and power factor, see the separate Monitoring > Phases page.
To set phase event notifications:
1. For each phase listed, check (or uncheck) SNMP Trap Notifications and/or Email Notifications to enable (or
disable) notifications for phase events.
2. Click Apply.
To Next Page
Loading...