Need help?Do you have a question about the Servomex SERVOPRO 4000 Series and is the answer not in the manual?
General| Brand | Servomex |
|---|---|
| Model | SERVOPRO 4000 Series |
| Category | Measuring Instruments |
| Language | English |
Provides instructions for safely unpacking, inspecting for damage, and checking accessories.
Details how to connect the analyser to a single-phase electrical power supply, including voltage settings.
Covers general guidelines and cautions for connecting signal leads to the analyser.
Explains connections for analogue outputs (PL1-PL4) and relay outputs, including rating limits.
Describes electrical connections for analogue inputs and their validity status signals.
Covers RS232/RS485 serial port connections, configuration, and cable requirements.
Discusses recommended calibration gas mixtures, their stability, and suitability for different transducers.
Explains gas connection ports based on analyser variant and sensor selection, with diagrams.
Explains the autocalibration facility for updating or checking calibration without user intervention.
Provides instructions and warnings for powering up the analyser after installation.
Emphasizes essential leak testing for toxic/flammable samples, specifying pressure limits.
Details specifications for isolated 0-20mA/4-20mA outputs, including adjustment and impedance.
Describes relay contacts for alarms and general purposes, including ratings.
Specifies serial port configuration for ASCII logging or Modbus communication.
Specifies performance requirements and warnings for the 4100D analyser.
Specifies performance requirements and warnings for the 4200D analyser.
Specifies performance requirements and warnings for the 4210D analyser.
Specifies performance requirements and warnings for the 4900D analyser.
To Next Page
