Need help?Do you have a question about the Servomex SERVOPRO Plasma and is the answer not in the manual?
General| Technology | Plasma Emission Spectroscopy |
|---|---|
| Power Supply | 24 V DC |
| Application | Industrial gas analysis |
| Protection Rating | IP65 |
| Target Gases | Argon, Hydrogen, Nitrogen, Oxygen |
| Output Signal | 4-20 mA |
Provides crucial safety warnings, cautions, and notes for safe operation and maintenance.
Details voltage, fuse rating, power consumption, and output signal ratings.
Lists detector type, measurement ranges, resolution, accuracy, and drift specifications.
Guides on securely mounting the analyzer in a rack or panel, including support requirements.
Covers general electrical installation procedures and safety requirements for the analyzer.
Highlights essential electrical safety precautions during analyzer installation.
Provides step-by-step instructions for connecting the analyzer's power supply.
Details how to connect the analog 4-20mA output signals for process indication.
Instructs on connecting sample and calibration gas lines to the analyzer inlets/outlets.
Guides on powering on the analyzer and the initial boot sequence to the main menu.
Covers basic analyzer configuration settings like auto-ranging and sample flow.
Explains how to calibrate the analyzer using zero and span gases.
Provides tools for checking analyzer status, cell counts, and flow.
Describes the main operating screen showing measurement, flow, and status.
Details the functionality and operation of the automatic calibration feature.
Explains how to configure and enable automatic calibration timers and modes.
Specific considerations and adaptations for the Helium version of the analyzer.
Information on analyzers with dual background gas capability (Argon/Helium).
Covers configuration and operational aspects of dual background analyzers.
Details the interface for controlling external valve boxes via RS-232.
Details RS-232 data formats and commands for status reporting.
To Next Page
