Plasma Gas Analyzer
48 02001001A_9
5.8.6 Lock range
Figure 39 - LOCK RANGE
Pressing “F3” from the SYSTEM GAIN MENU will bring you to the LOCK RANGE MENU.
The lock range can be set ‘’ON’’ or ‘’OFF’’.
If the lock range is set ‘’OFF’’, the user is allowed to manually change the range in the run menu.
If it is set ‘’ON’’ the range cannot be changed.
NOTE: To lock the range, you must disable the auto ranging in the configuration menu.
NOTE: You cannot activate the auto ranging if the range is locked.
To Next Page
Loading...
