Plasma Gas Analyzer
5 02001001A_9
1 DESCRIPTION AND DEFINITIONS
1.1 Scope of this manual
This manual provides installation, operation and routine maintenance instructions for
the SERVOPRO Plasma Trace N
2
Analyzer, abbreviated to "analyzer" in the
remainder of this manual.
1.2 Safety information
Read this manual and ensure that you fully understand its content before you attempt
to install, use or maintain the analyzer. Important safety information is highlighted in
this manual as WARNINGs and CAUTIONs, which are used as follows:
WARNING
Warnings highlight specific hazards which, if not taken into account,
may result in personal injury or death.
Where the above symbol is marked on the equipment the manual must be consulted in order to find
out the nature of the potential hazards and any actions which have to be taken to avoid them.
CAUTION
Cautions highlight hazards which, if not taken into account, can result in
damage to the analyzer or to other equipment or property.
This manual also incorporates 'Be aware of' information, which is used as follows:
This highlights information which it is useful for you to be aware of (for
example, specific operating conditions, and so on).
To Next Page
Loading...
