Servomex SERVOPRO Plasma - Time and Date Setting

Plasma Gas Analyzer
44 02001001A_9
5.8.3 Time and date setting
When you enter in the time and date setting menu, the following menu appears. Enter time first,
using the numbers on the keypad. For example, if you wish to enter 15:45:02, you only have to
do the following steps.
Figure 32 -TIME AND DATE SETTING (1)
1- Enter the number 15 on the keypad. Then, press enter.
2- Enter the number 46 on the keypad. Then press enter.
3- Enter the number 23 on the keypad. Then press enter.
Now, the menu is supposed to look like the following screen.
Figure 33 - TIME AND DATE SETTING (2)
<<<TIME AND DATE SETTING>>>
Time HH:MM:SS Actual: 00:00:00
Date YY/MM/DD Actual: 00/00/00
F3:NEXT F4:RET
<<<TIME AND DATE SETTING>>>
Time 15:46:23 Actual: 00:00:00
Date 00/MM/DD Actual: 00/00/00
F3:NEXT F4:RET