Plasma Gas Analyzer
45 02001001A_9
When you enter the time, you are obliged to enter the date. You only have to enter the year,
month and day like you did in the preceding steps for the time.
Figure 34 - TIME AND DATE SETTING (3)
When you enter the day and then press enter, the analyzer refreshes the actual time and date
and the menu should look like the following screen.
Figure 35 - TIME AND DATE SETTING (4)
If you enter an incorrect value, the analyzer clears the field and you are asked to enter a new
one.
<<<TIME AND DATE SETTING>>>
Time HH:MM:SS Actual: 15:46:23
Date YY/MM/DD Actual: 05/06/27
F3:NEXT F4:RET
<<<TIME AND DATE SETTING>>>
Time 15:46:23 Actual: 00:00:00
Date 05/06/27 Actual: 00/00/00
F3:NEXT F4:RET
To Next Page
Loading...
Need help?
General
