Version 1 2011-04-18
12
US
NOTE!
Make sure that the tube is submerged in the milk so that
the milk can be drawn correctly by the device.
2. Place a cup on the cup tray below the coffee-milk dispenser of the device and
adjust the height of the coffee-milk dispenser to the cup height (Fig. 5).
3. By turning the e-Select, select
caPPuccino, latte macchiato, white cof-
fee
, milk frothor milk.
4. If desired, you can
•
change the coffee strength.
•
change the water quantity.
•
change the milk-milk froth quantity.
NOTE!
To prepare the coffee specialty with your own settings,
press the operating control until is displayed next to
(‘7.2 Making individual settings for coffee preparation’ on
page 15)
5. Press the e-Select.
 The desired coffee specialty is prepared.
6. If you would like to change the milk quantity during dispensing, turn the e-Select
while the milk is being dispensed.
 The display shows:
quantitY
and below this, a bar with the set milk dispensing time in seconds.
7. If you would like to change the coffee quantity during dispensing, turn the e-
Select while the coffee is being dispensed.
Fig. 6: Connecting the milk tube Fig. 7: Tipping over the powder dosing chamber
To Next Page
Loading...
