SEVERIN S2 One Touch User Manual

Version 1 2011-04-18
11
US
Fig. 4: Adding beans Fig. 5: Placing the cup underneath and adjusting the dispenser height.
3. If desired, you can use the
•
change the coffee strength.
•
change the water quantity.
NOTE!
To prepare the coffee specialty with your own settings,
press the operating control until is displayed next to
‘7.2 Making individual settings for coffee preparation’ on
page 15)
4. Press the e-Select.
 The desired coffee specialty is prepared.
5. If you would like to change the coffee quantity during dispensing, turn the e-
Select while the coffee is being dispensed.
 The display shows:
coffee quantitY
and under that, a bar with the set quantity in „ml“. The coffee dispensing
will stop automatically after the selected quantity has been prepared. It
can also be stopped early by pressing the e-Select.
6.3.2 Preparing coffee-milk specialties
To prepare a cappuccino, a white coffee or a latte macchiato, there must be enough
beans in the bean container and enough water in the water tank. Also place a contain-
er  lled with milk (e.g. SEVERIN milk cooler) next to the device.
NOTE!
Coffee specialties prepared with milk are best if the milk is
chilled to refrigerator temperature.
1. Plug the milk tube onto the connection on the coffee-milk dispenser and hang the
other end of the tube in the milk container (Fig. 6).

SEVERIN S2 One Touch Specifications

General

Type	Coffee
Product type	Espresso machine
Certification	CE, CB, EMC
Capacity in cups	- cups
Water tank capacity	1.5 L
Coffee beans capacity	140 g
Dishwasher-proof parts	Yes
Maximum operating pressure	15 bar
Product color	Brown
AC input voltage	230 V
Multi beverage	No

Weight and Dimensions

Depth	330 mm
Width	240 mm
Height	350 mm
Weight	9000 g