EasyManuals Logo

SEVERIN S2 One Touch User Manual

SEVERIN S2 One Touch
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
Version 1 2011-04-18
17
US
7.3.4 Energy savings options
The device can switch itself off if it is not used for a longer period of time. You can set
the time period.
Here‘s how to set the energy savings options:
1. Press the menu button for at least 3 seconds and use the e-Select to select the
device settings
menu option.
2. Then select the
auto Power-off
menu option.
 The display shows the currently-set time for the automatic switch-off.
3. Turn the e-Select to change the setting and
conrm your entry by pressing the e-Select or
interrupt the change with the
button.
7.3.5 Resetting the device
You can reset the device to the factory settings. All personal settings for coffee prepa-
ration are thus lost and the device starts once again with the commissioning
(‘5. Switching on for the rst time’ on page 8).
Resetting the device via the menu
Here‘s how to reset the device to the factory settings:
1. Press the menu button for at least 3 seconds and use the e-Select to select the
device settings
menu option.
2. Then select the
factorY settings
menu option.
 The display shows:
reset device to factorY settings?
3. Press
the
button if you want to call up the factory settings or
the
button if you want to keep your personal settings.
 The display shows the note
device set to factorY defaults
for a short while. All settings are reset. You must now make all the basic
settings again (‘5. Switching on for the rst time’ on page 8).
Resetting the device in case of incorrect language setting
If you have accidentally set an incorrect language and a resetting via the menu is not
possible, you can also reset the device to the delivery state as follows:
1. Switch the device off.
2. Press the outer two buttons below the display and hold them down.
3. Switch the device on and continue to hold the buttons down until the message
device set to factorY defaults.
appears on the display.
 All settings are reset. You must now make all the basic settings again
(‘5. Switching on for the rst time’ on page 8).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SEVERIN S2 One Touch and is the answer not in the manual?

SEVERIN S2 One Touch Specifications

General IconGeneral
TypeCoffee
Product typeEspresso machine
CertificationCE, CB, EMC
Capacity in cups- cups
Water tank capacity1.5 L
Coffee beans capacity140 g
Dishwasher-proof partsYes
Maximum operating pressure15 bar
Product colorBrown
AC input voltage230 V
Multi beverageNo
Weight and Dimensions IconWeight and Dimensions
Depth330 mm
Width240 mm
Height350 mm
Weight9000 g

Related product manuals