Why does my SEVERIN Coffee Maker display 'PLEASE CLEAN BREW ING UNIT'?
The 'PLEASE CLEAN BREW ING UNIT' message on your SEVERIN Coffee Maker indicates that the brewing unit must be cleaned. Clean the brewing unit.
What to do if the SEVERIN Coffee Maker displays 'WATER SUPPLY ERROR'?
If the SEVERIN Coffee Maker shows a 'WATER SUPPLY ERROR', the brewing unit may not have enough water. You should clean the water tank, paying special attention to its water discharge on the floor. Then, fill the water tank halfway with cold drinking water. If necessary, remove and replace the water filter. If the problem continues, clean the brewing unit.
Why does my SEVERIN Coffee Maker say 'PLEASE RE FILL BEANS'?
The 'PLEASE RE FILL BEANS' message on your SEVERIN Coffee Maker indicates that the bean container is empty. To resolve this, simply fill the bean container with beans.
What to do if my SEVERIN S2+ One Touch says 'TOO MUCH COFFEE. CANCEL'?
If your SEVERIN Coffee Maker displays 'TOO MUCH COFFEE. CANCEL', it means there is too much coffee in the brewing unit. Clean the brewing unit. In the future, set a higher fineness. If you're adding ground coffee via the powder dosing chamber, reduce the amount of coffee powder you're using for a cup.
What to do if my SEVERIN S2+ One Touch Coffee Maker says 'TOO LITTLE GROUND COF FEE. CANCEL'?
If your SEVERIN Coffee Maker displays 'TOO LITTLE GROUND COF FEE. CANCEL', it means there is too little coffee in the brewing unit. Clean the brewing unit. In the future, set a coarser fineness. If you're adding ground coffee via the powder dosing chamber, increase the amount of coffee powder you're using for a cup.
How to restart SEVERIN S2+ One Touch Coffee Maker after 'SYSTEM ERROR. PLEASE RESTART' message?
If your SEVERIN Coffee Maker displays 'SYSTEM ERROR. PLEASE RESTART', switch the device off for several seconds and then switch it on again.
How to fix 'GRINDER BLOCKED. CONTACT SERVICE' error on my SEVERIN S2+ One Touch?
If your SEVERIN Coffee Maker displays 'GRINDER BLOCKED. CONTACT SERVICE', set the grinder regulator on the coarsest fineness and prepare another coffee speciality. If this solves the problem, set the desired fineness again for the next beverage. If problem persists, contact customer service.
What to do if SEVERIN S2+ One Touch Coffee Maker displays 'CHECK BREW ING UNIT AND INSERT'?
If your SEVERIN Coffee Maker displays 'CHECK BREW ING UNIT AND INSERT', it means the brewing unit is not inserted correctly. Insert the brewing unit.
What to do if SEVERIN Coffee Maker displays 'BREWING UNIT DOOR OPEN'?
If the SEVERIN Coffee Maker displays 'BREWING UNIT DOOR OPEN', it means that the door of the brewing unit is not closed. Properly close the door of the brewing unit.
What to do if my SEVERIN S2+ One Touch shows a 'WATER SUPPLY ERROR'?
If the SEVERIN Coffee Maker displays 'WATER SUPPLY ERROR', it means there's not enough water. First, clean the water tank, especially its water discharge on the floor. Then, fill the water tank halfway with cold drinking water. If needed, remove and replace the water filter. If the issue continues, also clean the brewing unit.
Details potential dangers and risks associated with operating the coffee maker.
Step-by-step guide for preparing basic coffee and espresso drinks.
How to adjust the coffee bean grind size for optimal taste.
Routine cleaning procedures for daily maintenance of the coffee maker.
How to rinse the milk system for hygiene and quality.
Detailed cleaning process for removing milk residues from the milk system.
Using a cleaning tablet for thorough rinsing and cleaning of the coffee system.
Resolving issues related to the brewing unit and its door.
Troubleshooting common system errors, water supply, and grinder blockages.
General| Brand | SEVERIN |
|---|---|
| Model | S2+ One Touch |
| Category | Coffee Maker |
| Language | English |
To Next Page