SEVERIN S2+ One Touch - Water Hardness; Water Filter; Energy Savings Options

53
Version 3 2012-08
GB
NOTE!
If you have accidentally selected the incorrect
language, you can reset the device to the factory
setting (►"7.3.5 Resetting the device in case of
incorrect language setting").
7.3.2 Water hardness
Select the water hardness according to the water hardness in your house-
hold. Depending on the setting, your device will inform you when it is time to
perform a descaling.
NOTE!
In order to operate your device optimally, set the
water hardness according to the specications of
your water utility. Use the included water test strip
to determine the water hardness.
Here's how to set the water hardness:
1. Press the menu button for at least 3 seconds and use the e-Select to
select the
DEVICE MENU.
2. Then select the
WATER HARDNESS
menu option.
 The display shows:
HARDNESS 4 PLEASE SELECT WATER HARDNESS.
3. Turn the e-Select to change the setting and
• conrm your entry by pressing the e-Select or
• cancel the change with the button under the display eld .
7.3.3 Water lter
If you want to use a water lter, you must set the device accordingly. The
water lter improves the water quality and the device requires less descaling
if properly operated.
NOTE!
SEVERIN recommends the use of a SEVERIN
water lter for high water quality. The water lters
are effective for approx. 4 to 8 weeks before they
have to be changed.
This is how to set the device for the use of a water lter:
1. Press the menu button for at least 3 seconds and use the e-Select to
select the DEVICE MENU.
2. Then select the
WATER FILTER
menu option.
 The display shows:
USE WATER FILTER?
3. Select with the e-Select
• YES, if you want to insert a water lter in the water tank or
• NO, if you do not want to use a water lter.
4. Follow the steps in section ►"8.2.6 Changing water lter.
7.3.4 Energy savings options
The device has an automatic power-off function. You can set the time period
individually this way.
Here's how to set the energy savings options:
1. Press the menu button for at least 3 seconds and use the e-Select to
select the
DEVICE MENU.