50
Operating Instructions – Explosion-Proof AC Motors DR63/eDR63, DVE250/280
8
Mounting a VE forced cooling fan
Inspection / Maintenance
8.4 Mounting a VE forced cooling fan
1. Before installing the forced cooling fan [1], check to see that the fan wheel and the
fan motor are not damaged.
2. After installation, turn the fan wheel to make sure that the fan wheel does not rub in
any place. The clearance between the fan wheel and fixed parts must be at least
1 mm.
[1]
INFORMATION
Observe the operating instructions of the forced cooling fan.
To Next Page
Loading...
