Need help?Do you have a question about the SEW-Eurodrive MOVIPRO PHC21A-A075M1-E45C-C5 and is the answer not in the manual?
General| Type | Controller |
|---|---|
| Model | PHC21A-A075M1-E45C-C5 |
| Power Rating | 0.75 kW |
| Motor Power | 0.75 kW |
| Control Type | Vector control |
| Communication Interface | Ethernet |
| Series | MOVIPRO |
| Ambient temperature | 0°C to +40°C |
Explains the grading and meaning of signal words and hazard symbols used in safety notes.
General safety notes to prevent injury to persons and damage to property.
Outlines user responsibilities for safe operation and compliance with regulations and instructions.
Specifies intended applications, restrictions, and compliance with directives like EMC and Low Voltage.
Ensures correct installation and cooling, and protection from mechanical strain.
Details requirements for safe electrical installation and preventive measures.
Explains requirements for protective separation of power and signal connections according to EN 61800-5-1.
Highlights safety measures during startup and operation, including voltage precautions and minimum switch-off times.
Lists and explains the warning signs attached to the device for identifying hazardous areas.
Details the coding for different function units like Power section, Communication, and Energy supply.
Outlines measures for electrical safety, including ground connection, equipotential bonding, and leakage currents.
Provides step-by-step instructions for device startup, including Ethernet configuration and program loading.
Emphasizes safety during operation, warning about charged capacitors, hot surfaces, and parameter changes.
Provides information on fault handling, including switch-off responses and acknowledging fault messages.
Provides technical data related to safety functions, service life, and interfaces for safe disconnection.
To Next Page