SEW-Eurodrive MOVIPRO PHC21A-A075M1-E45C-C5 - Electrical installation; Protective separation

2
Safety notes
Electrical installation
Operating Instructions – MOVIPRO
®
PHC2.A-A..M1-E45C-C5
14
2.8 Electrical installation
Ensure that all of the required covers are correctly attached after carrying out the elec-
trical installation.
Make sure that preventive measures and protection devices comply with the applica-
ble regulations (e.g. EN60204-1 or EN61800-5-1).
2.8.1 Required preventive measure
Make sure that the product is correctly attached to the ground connection.
2.9 Protective separation
The product meets all requirements for protective separation of power and electronics
connections in accordance with EN 61800-5-1. The connected signal circuits must
meet requirements according to SELV (Safety Extra Low Voltage) or PELV (Protective
Extra Low Voltage) to ensure protective separation. The installation must meet the re-
quirements for protective separation.
26596598/EN – 10/2020