7
Startup
Reset the password
Manual – MOVISAFE
®
CSB51A Safety Option
29
7.7 Reset the password
7.7.1 Procedure
INFORMATION
Observe the data in the operating instructions of the respective decentralized basic
device when installing or removing the electronics cover.
Proceed as follows:
1. Switch off the system.
2. Dismount the electronics cover. To reset the password, you require the master
password of the safety option.
3. The master password of the option can be found on the inside of the electronics
cover.
4. Mount the electronics cover back onto the decentralized basic device.
5. Switch on the system.
6. Open the "Assist CS.." parameterization tool. To open the main menu, click the red
"Assist CS.." tile in the left upper corner.
7. Select the menu item "Change password". In the "Old password" edit box, enter
the master password.
8. In the edit boxes "New password" and "Reenter new password", enter the new
password. Confirm your entries.
25931075/EN – 04/2019
To Next Page
Loading...
Need help?
General
