Sewha SI 410 - SPAN VALUE CALCULATION; 5-2-6. Calculating span value

- 18 -
In this step, if there is unstable condition such as some forces or Vibration on
the scale part, “Error-A” will be displayed, and “DEAD value” will not be calculated.
Please remove the cause of the force or vibration and process it again.
5-2-6. Calculating span value
If the count is over, input the weight of your “Test Weight” and press key.
If “UP” is displayed, please load “Test Weight” on the scale part and press key.
Indicator will search “DEAE weight” during 10secs automatically to find the best
condition.