Sewha SI 410 - Page 28

- 28 -
204
Port 1 transference under
stream mode
00
00 : Countinuously
01 : Single time on every steady state
02 : Single time at the first steady point
03 : Single time output after weighing finish
04 : When input Print key
205
Port 1 “Check-Sum” under
command mode
00
00 : Disuse
01 : Use
206
Port 1 Modbus communication
data SWAP
00
00 : Basic
01 : Customizing
210
Port 2 Parity / Stop bit
00
00: Data bit8, Stop bit1, Parity bit Non
01: Data bit8, Stop bit1, Parity bit Odd
02: Data bit8, Stop bit1, Parity bit Even
03: Data bit7, Stop bit1, Parity bit Non
04: Data bit7, Stop bit, Parity bit Even
211
Port 2 Communication Speed
02
00 : 2,400bps
01 : 4,800bps
02 : 9,600bps
03 : 14,400bps
04 : 19,200bps
05 : 28,800bps
06 : 38,400bps
07 : 57,600bps
08 : 76,800bps
09 : 115,200bps
212
Port 2 Communication mode
01
00: Simplex / Stream Mode
01: Duplex / Command Mode
02: Duplex / Command Mode (Compatible with
SI4100)
03: Print
04: Modbus(RTU)
213
Port 2 Format under Stream
Mode
00
00 : Format 1 (18byte)
01 : Format 2 (21byte)
02 : Format 3 (17byte)
03 : Format 4 (22byte)
04 : Format 5 (15byte)
214
Port 2 transference under
stream mode
00
00 : Countinuously
01 : Single time on every steady state
02 : Single time at the first steady point
03 : Single time output after weighing finish
04 : When input Print key
215
Port 2 “Check-Sum” under
command mode
00
00 : Disuse
01 : Use