Sewha SI 410 - Page 7

- 7 -
3-3-2. State LED
LED
State
STEADY
When the weight is stable, ON.
ZERO
When the current weight is near zero, ON.
TARE
When the “TARE” function is set, ON.
HOLD
When the “HOLD” function is set, ON.
TxD
When indicator sends date out through serial communication.
RxD
When indicator receives date out through serial communication.
PRT
When the weighing data is printed, ON.
OUT1
When OUT1 (Relay) is operated, ON.
OUT2
When OUT2 (Relay) is operated, ON.
OUT3
When OUT3 (Relay) is operated, ON.
OUT4
When OUT4 (Relay) is operated, ON.
OUT5
When OUT5 (Relay) is operated, ON.
OUT6
When OUT6 (Relay) is operated, ON.
OUT7
When OUT7 (Relay) is operated, ON.
RUN
When the weighing process is going on.
HIGH
When display test is operated, ON
LOW
When display test is operated, ON
kg
Displayed weight unit under Function 103-00
g
Displayed weight unit under Function 103-01
t
Displayed weight unit under Function 103-02
%
Displayed weight unit under Function 103-03
pcs
Displayed weight unit under Function 103-04
oz
Displayed weight unit under Function 103-05
lb
Displayed weight unit under Function 103-06