Shark BR 97-723 • REV. 11/06
OPERATOR’S MANUAL
PRESSURE WASHER
10
STEP 7: Turn the engine switch to "ON" position. STEP 8: Pull the starter grip. If the engine fails to start
after 2 pulls, squeeze the trigger gun to release pressure
and repeat step. Return starter gently. After the engine
warms up enough to run smoothly, move choke to run
position and throttle to fast position.
CAUTION: Small engines may kick back. Do not hold
pull starter grip tightly in hand.
OPERATING INSTRUCTIONS (CON'T)
WARNING! Never replace
nozzles without engaging the
safety latch on the spray gun
trigger.
The five color-coded quick connect
nozzles provide a wide array of spray
widths from 0° to 45° and are easily ac-
cessible when placed in the convenient
rubber nozzle holder, which is provided
on the front of the machine.
NOTE: For a more gentle rinse, select
the white 40° or green 25° nozzle. To
scour the surface, select the yellow 15°
or red 0° nozzle. To apply detergent
select the black nozzle.
NOZZLES
On-Off
Switch
Safety
Latch
To Next Page
Loading...
Need help?
General
