To Next PageTo Next PageWhy Sharp Copier does not operate?
Your Sharp Copier may not be operating due to several reasons. First, ensure the copier is plugged into a grounded outlet. Then, check if the power switch is turned on. Also, make sure that the side and front covers are securely closed. Gently close the front cover and then the side cover.
Why Sharp AL-1000 Copier paper misfeeds frequently?
Frequent paper misfeeds in your Sharp Copier can occur due to several reasons. Make sure you are using standard paper. If you're using special papers, feed them through the manual bypass. Ensure the copy paper is stored flat in its wrapper in a dry location to prevent curling or dampness. Remove any pieces of misfed paper from inside the copier. Check that the paper guides in the paper tray are set properly for the paper size you're using. Also, avoid overfilling the paper tray. Finally, ensure that the copy paper is within the specified weight range.
General
