Sharp AL-1000

DGB
3–34
Type Digital copying machine, desk-top type
Copy system Dry, electrostatic transfer
Originals Sheets, bound documents
Original size Max. B4
Copy sizes A6 to A4 (A5 to 4 for SPF)
(Feed copy paper lengthwise only.)
Image loss: Max. 4 mm (leading and trailing edges)
Max. 3 mm (either of the other edges)
Copy speed AL-1000: 10 copies/min.
AL-1200 and AL-1220: 12 copies/min.
Continuous copying Max. 99 copies; subtractive counter
First-copy time 9.6 sec. (normal copying mode)
16.0 sec. or less (copying from preheat mode)
23.0 sec. or less (copying from auto power shut-off mode)
23.0 sec. or less (copying immediately after power on)
Copy ratio Variable: 50% to 200% in 1% increments (total 151 steps)
Fixed: 50%, 70%, 81%, 100%, 141%, 200%
Exposure system Moving optical source, slit exposure (stationary platen) with automatic expo-
sure/SPF: Moving original
Copy paper feed One paper tray with automatic feed (250 sheets); one single-sheet manual
bypass/One bypass tray with 50-sheet automatic feed capability
Fusing system Heat rollers
Development system Magnetic brush development
Light source Xenon lamp
Resolution Scan: 400 dpi Output: 600 dpi
Gradation Scan: 256 levels Output: 2 levels
Memory: 6 MB (AL-1220 only)
Power supply Local voltage ±10% (For this copiers power supply requirements, see the
name plate located on the back of the unit.)
Power consumption Max. 1000 W
Overall dimensions 607 mm (W) x 445 mm (D)
809 mm (W) x 445 mm (D) with multi bypass
Weight Approx. 18 kg, TD and drum cartridges included/AL-1220: 21.5 kg
Copier dimensions 518 mm (W) x 445 mm (D) x 293 mm (H)
518 mm (W) x 477 mm (D) x 464 mm (H) (AL-1220)
Operating conditions Temperature: 10°C to 30°C
Humidity: 20% to 85%
Noise level Sound Power Level L
WA
(1B=10dB)
Copying: 6.6 [dB(A)], Standby: Background noise level
Sound Pressure Level L
PA
(bystander positions)
Copying: 40 [dB(A)], Standby: Background noise level
Noise emission measurement in accordance with ISO 7779.
SPECIFICATIONS
First-copy time may differ depending on operating conditions, such as power-supply voltage and room
temperature. The values for copy speed are rounded to the nearest whole number.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may be some deviation from these values
in individual units.
PUMA_SPF_NON_EU_3.p65 01/12/98, 08:5734
Downloaded from: http://www.usersmanualguide.com/