31
Basic adjustment settings (Analogue/Digital)
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Power Control”.
• Power control menu displays.
2
Press
a
/
b
to select “No Signal Off”, and then
press ENTER.
3
Press
c
/
d
to select “Enable”, and then press
ENTER.
• Five minutes before the power shuts down,
remaining time displays every minute.
4
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Power Control”.
• Power control menu displays.
2
Press
a
/
b
to select “No Operation Off”, and
then press ENTER.
3
Press
c
/
d
to select “Enable”, and then press
ENTER.
• Five minutes before the power shuts down,
remaining time displays every minute.
4
NOTE
• “Disable” is factory preset value.
Power Control
Power Control setting allows you to save energy.
No Operation Off
When set to “Enable”, the power will automatically shut
down if there is no operation for 3 hours.
NOTE
• “Disable” is factory preset value.
• When a TV programme fi nishes, this function may not
operate.
No Signal Off
When set to “Enable”, the power will automatically shut
down if no signal inputs for 15 minutes.
42PD7X_en_e.indd 3142PD7X_en_e.indd 31 2007/01/12 15:47:372007/01/12 15:47:37
To Next Page
Loading...
