Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Option”.
2
Press
a
/
b
to select “Colour System”, and
then press ENTER.
3
Press
a
/
b
to select a compatible video signal
system of your equipment, and then press
ENTER.
4
Auto
PAL
SECAM
NTSC 3.58
NTSC 4.43
PAL-60
48
Useful adjustment settings
Colour system setting
You can change the colour system to one that is
compatible with the image on the screen.
NOTE
• Factory preset value is “Auto”.
• If “Auto” is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
Identifi cation
You can check the current version of the software on
the screen.
Language setting for on-screen
display
You can also select a language from setup menu.
Select from among 3 languages: English, Chinese and
Arabic.
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
Press
a
/
b
to select “Language”, and then
press ENTER.
3
Press
a
/
b
to select the desired language
listed on the screen, and then press ENTER.
4
42PD7X_en_h.indd 4842PD7X_en_h.indd 48 2007/01/12 15:49:372007/01/12 15:49:37
To Next Page
Loading...
