Sharp AQUOS LC-42PD7X

39
Useful adjustment settings
Password setting for child lock
(for TV/DTV input mode)
Allows you to use a password to protect certain
settings from being accidentally changed.
Setting a password
Register a 4-digit password number to use the Child
Lock function.
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
Press
a
/
b
to select “Child Lock”, and then
press ENTER.
3
If you already set the password, enter it here.
If not, enter the factory preset password
“1234”.
4
Change password
Reset
New Password
–––
Reconfirm
––––
–
NOTE
• To view a locked channel (Lock setting in Programme
Setup “Manual Adjust” is set to “On”), you must enter
a password. (See page 24.) When you select a locked
channel, a password prompt message pops up. Press
ENTER to display the password input window.
Enter the same 4-digit number as in step 6 to
confi rm.
• “The new password was registered” displays.
7
Press
a
/
b
to select “Change password”, and
then press ENTER.
5
Change password
Reset
New Password
–––
Reconfirm
––––
–
Enter the 4-digit number as a password using
0 — 9.
6
Resetting the password
Allows you to reset your password.
NOTE
• As a precautionary measure, make a note of your
password and keep it in a familiar place. If you lose
or forget your password, initialise the TV to return all
settings except for the TV channel settings to factory
preset values. (See page 58.)
• This function is only available for TV/DTV input mode.
• To relock a channel which has been temporarily unlocked
by inputting the correct password, turn power off and then
on again.
Yes No
Change password
Reset
Press
c
/
d
to select “Yes”, and then press
ENTER.
6
Press
a
/
b
to select “Reset”, and then press
ENTER.
5
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
Press
a
/
b
to select “Child Lock”, and then
press ENTER.
3
Enter the password.
4
42PD7X_en_g.indd 3942PD7X_en_g.indd 39 2007/01/12 15:48:572007/01/12 15:48:57