Preparation
11
Before turning on the power
Notes on installing the TV
• Avoid direct sunlight and place the TV in a well-ventilated location.
• Place the TV in a level location.
• Do not turn on the power of the TV before connecting the AC cord.
1
Connecting the antenna cable
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of
connections that are used for coaxial cable.
2
Connecting external devices
See pages 14 and 15 for connecting external equipment, such as a VCR and DVD player.
3
Connecting the AC cord
• Place the TV close to the AC outlet, and keep the power plug within reach.
• Disconnect the AC cord from the AC outlet if the TV will not be used for a long period of time.
4
Bundling the cables
Insert the cable clamp in the hole on the TV as shown.
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
Room antenna terminal
(75-ohm type)
To antenna
terminal
Antenna cable
(commercially available)
Standard DIN45325 plug (IEC169-2)
75-ohm coaxial cable (round cable)
TV (rear view)
AC outlet
AC cord
Cable clamp
LC46LB700X_EN.indb 11LC46LB700X_EN.indb 11 12/29/2009 1:40:23 PM12/29/2009 1:40:23 PM
To Next Page
Loading...
