23
Watching TV
Selecting programmes
You can change channels in several ways.
Using CHr/s on the remote control unit
• Press CH
r
to increase the channel number.
• Press CH
s
to decrease the channel number.
NOTE
• CH
r
/
s
on the TV operates the same as CH
r
/
s
on
the remote control unit.
Using 0 — 9 on the remote control unit
Select the channels directly by pressing buttons 0 to 9.
a
To select a 1-digit channel (e.g. channel 2):
• Press 0, followed by 2.
To select a 2-digit channel (e.g. channel 12):
• Press 1, followed by 2.
To select a 3-digit channel (e.g. channel 020):
• Press 0, press 2, followed by 0.
When viewing Teletext information
View a page directly which is 3-digit page number from
100 to 899 by pressing buttons 0 to 9.
Adjusting the volume
Changing the volume
You can change the volume on the TV or on the
remote control unit.
• To increase the volume, press VOL
k
.
• To decrease the volume, press VOL
l
.
20
NOTE
• “TV”, “Blu-ray”, “INPUT1”, “INPUT2”, “INPUT3”, “INPUT4”,
“INPUT5”, “INPUT6” and “INPUT7” (PC) modes can store
volume adjustment values separately.
Menu language settings
You can also select a language from setup menu.
Select from among 3 languages: English, Simplifi ed
Chinese and Arabic.
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “Setup”.
3
Press
a
/
b
to select “Language”, and then
press ENTER.
4
Press
a
/
b
to select the desired language
listed on the screen, and then press ENTER.
NOTE
• You cannot change language in “Blu-ray disc Setup” menu.
In “Blu-ray disc Setup” menu, language is English only.
LC46LB700X_EN.indb 23LC46LB700X_EN.indb 23 12/2/2009 8:49:40 AM12/2/2009 8:49:40 AM
To Next Page
Loading...
