EasyManua.ls Logo

Sharp Aquos LC-46LB700X

Sharp Aquos LC-46LB700X
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
62
Disc Playback
Partial Repeat Playback (Repeat Playback
of a Specifi ed Part)
DVD-VIDEO
DVD-R
DVD-RW
AUDIO CD
NOTE
Some operations in the following playback function cannot
be performed depending on the specifi cations of the disc.
1
Press DISC MENU during playback.
The DISC MENU control screen is displayed.
2
Press
a
/
b
to select “ ”, and then press
ENTER.
3
Press
a
/
b
to select “On”, and then press
ENTER.
4
Press
c
/
d
to select “Scene Selection”, and
then press ENTER.
“Set Start Point” displays.
Playback Chapter
Playback Title
Scene Selection
Set Start Point
5
Press ENTER at the scene where you want to
set the start point.
“Set Start Point” displays.
6
Press ENTER at the scene where you want to
set the end point.
You can press
J
to fast forward to the scene
where you want to set the end point. When you
reach the desired scene, simply press
d
and then
ENTER to set the end point.
To cancel Repeat Playback
1
Press
a
/
b
to select “ ” while the DISC
MENU control screen is displayed.
2
Press
c
/
d
to select “Off”, and then press
ENTER.
NOTE
• Press
U
, the Repeat Playback is cancelled and the next
chapter is played back.
• Press
T
once, the Repeat Playback is cancelled and the
TV returns to the start of current chapter (track).
If you press
T
again (within about 5 seconds), the TV will
skip to the beginning of the previous chapter (track).
For Partial Repeat Playback, set the start and end points
within the same title.
Repeat Playback may be forbidden depending on the disc.
Partial Repeat Playback may not work in multi-angle
scenes.
• If you press DISPLAY, you can confi rm the Repeat
Playback status.
Switching the Audio
You can change the audio track using MPX.
The displayed information varies depending on the disc.
BD-VIDEO
DVD-VIDEO
If multiple audio is recorded, you can switch the audio
each time you press MPX.
The newly selected audio track will be displayed.
DVD-RW
DVD-R
When a recorded broadcast with stereo or
monaural audio is played back:
“Stereo” is displayed. (Audio cannot be switched.)
LC46LB700X_EN.indb 62LC46LB700X_EN.indb 62 12/2/2009 8:49:49 AM12/2/2009 8:49:49 AM

Table of Contents

Related product manuals