Appendix
Mounting the TV on the wall
Removing the stand
For wall mounting with the optional bracket (AN-52AG4), remove the stand.
Before detaching/attaching the stand
• Before detaching (or attaching) the stand, unplug the AC cord from the AC outlet.
• Remove all terminal covers and connected cables.
• Lay the TV down on cushioning (such as a blanket) over a table.
• Make sure two or more people perform the operation.
CAUTION
• Do not remove the stand from the TV unless using an optional bracket to mount it.
12
1
Detach the stand from the TV. (Hold the stand so
it will not drop from the edge of the base area.)
2
Make sure do detach the TV with it tilted slightly
backwards and supporting the knobs on the
rear of the TV while holding the stand.
3
Don’t push hard on the speaker cover portion of
the TV.
1
Unfasten the four screws used to secure the
stand in place.
2
Attach the wall mount brackets.
3
Set the TV on the wall.
As the TV is very heavy, be careful not to drop it on
a hard fl oor or on your foot.
NOTE
• To attach the stand, perform the above steps in reverse order.
93
LC46LB700X_EN.indb 93LC46LB700X_EN.indb 93 12/15/2009 5:43:51 PM12/15/2009 5:43:51 PM
To Next Page
Loading...
