50
Settings when using external devices
Skipping HDMI/RGB input
This setting allows you to skip the HDMI or RGB input
on the input source selection operation.
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “Setup”.
3
Press
a
/
b
to select “Input skip”, and then
press ENTER.
4
Press
a
/
b
to select the Input (INPUT1 to
INPUT3 and INPUT7 ) you wish to skip, and
then press ENTER.
INPUT1 (HDMI)
INPUT2 (HDMI)
INPUT3 (HDMI)
INPUT7 (RGB)
Yes
No
Skip input selection of HDMI
5
Press
c
/
d
to select “Yes”, and then press
ENTER.
6
Press MENU to exit.
Colour system settings
You can change the colour system to one that is
compatible with the image on the screen.
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “Option”.
3
Press
a
/
b
to select “Colour system”, and
then press ENTER.
4
Press
a
/
b
to select a compatible video signal
system of your equipment, and then press
ENTER.
Auto
PAL
SECAM
NTSC 3.58
NTSC 4.43
PAL-60
Colour system settings
NOTE
• Factory preset value is “Auto”.
• If “Auto” is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
• “Colour system” is selectable only when inputting an
S-VIDEO or composite signal.
(Example)
Labelling input sources
You can assign each input source a label as you prefer.
1
Press TV/VIDEO to select the desired input
source.
2
Press MENU and the MENU screen displays.
3
Press
c
/
d
to select “Setup”.
4
Press
a
/
b
to select “Input label”, and then
press ENTER.
5
Press
a
/
b
/
c
/
d
to select each character of
the new name for the input source, and press
ENTER.
A
K
0
U
B
L
1
V
C
M
2
W
D
N
3
X
E
O
4
Y
F
P
5
Z
G
Q
6
+
H
R
7
-
I
S
8
.
J
T
9
_
CLEAR
BACK
END
External equipment name settings
6
Repeat until the name is fully spelt out.
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, select “END”, then press
ENTER to exit from the labelling menu.
TV
INPUT SOURCE
DVD
INPUT2
Blu-ray
INPUT6
INPUT3
INPUT4
INPUT5
INPUT7
NOTE
• You cannot change labels if the input source is TV.
(Example)
LC46LB700X_EN.indb 50LC46LB700X_EN.indb 50 12/2/2009 8:49:46 AM12/2/2009 8:49:46 AM
To Next Page
Loading...
