16
Preparation
Connecting to the ETHERNET terminal
• You can enjoy a variety of contents with interactive functions by connecting to the internet when playing BD-
LIVE compatible discs. Refer to pages 59 and 65 regarding further information on BD-LIVE functions.
• When using the internet, a broadband internet connection as shown below is required.
STEPS
1 Be sure to turn off this TV and the equipment before making any connections.
2 Remove the cover of ETHERNET terminal on rear of the TV, and keep the cover.
3 Firmly connect a ETHERNET cable (commercially available) to the ETHERNET terminal (
1
and
2
).
After connecting
• Perform the communication setting. (Pages 66–67)
• Load a BD-LIVE compatible disc and play back the contents. (Pages 57 and 59)
To ETHERNET
terminal
To ETHERNET
terminal
ETHERNET cable
(commercially available)
CAUTION
• When using a broadband internet connection, a
contract with an internet service provider is required.
For more details, contact your nearest internet service
provider.
• Refer to the operation manual of the equipment you
have as the connected equipment and connection
method may differ depending on your internet
environment.
NOTE
• Use a ETHERNET cable/router supporting 10BASE-T/
100BASE-TX.
This TV
Example of a Broadband Internet Connection
Internet Modem Hub or broadband router PC
LC46LB700X_EN.indb 16LC46LB700X_EN.indb 16 12/2/2009 8:49:38 AM12/2/2009 8:49:38 AM
To Next Page
Loading...
