28
Watching TV
Clearing the password
Allows you to clear your password.
1
Repeat steps 1 to 3 in Setting a password.
2
Enter the password.
3
Press
a
/
b
to select “Clear password”, and
then press ENTER.
4
Press
c
/
d
to select “Yes”, and then press
ENTER.
Yes No
Change password Clear password
Clear password
Parental rating
NOTE
• As a precautionary measure, make a note of your
password and keep it in a familiar place. If you lose
or forget your password, initialise the TV to return all
settings except for the TV channel settings to factory
preset values. (See page 71.)
• This function is only available for TV input mode.
• To relock a channel which has been temporarily unlocked
by inputting the correct password, turn power off and then
on again.
Password setting for the child lock (for TV
input mode)
Allows you to use a password to protect certain
settings from being accidentally changed.
Setting a password
Register a 4-digit password number to use the Child
Lock function.
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “Setup”.
3
Press
a
/
b
to select “Child lock”, and then
press ENTER.
4
If you have already set the password, enter it
here.
5
Press
a
/
b
to select “Change password”, and
then press ENTER.
Change password Change password
Clear password
Parental rating
New password
–––
Reconfirm
––––
–
6
Enter the 4-digit number as a password using
0 – 9.
Change password
Clear password
Parental rating
New password
–––
Reconfirm
––––
–
Enter your new password. Use 4 digits.
7
Enter the same 4-digit number as in step 6 to
confirm.
• “The new password was registered” displays.
NOTE
• To view a locked channel (Lock setting in Programme setup
“Manual adjust” is set to “On”), you must enter a password.
(See page 24.) When you select a locked channel, a
password prompt message pops up. Press RETURN to
display the password input window.
LC46LE700X_EN.indb 28LC46LE700X_EN.indb 28 12/17/2009 9:36:57 AM12/17/2009 9:36:57 AM
To Next Page
Loading...
