On=Screen Display Menu
[] How to temporarily release the V-CHIP BLOCK
When the V-CHIP BLOCK is working and censors a
broadcast, "V-CHiP HAS BEEN ACTIVA]ED." displays.
1 Press ENTER while the V--CHIP is working, and
then the secret number setting menu displays.
2 Input the 4--digit secret number by using 0-9. At this
time V-CHiP BLOCK temporarily releases,
[] Reactivating the temporarily released V-CHIP
BLOCK
You can reactivate the temporarily released V-CHIP
BLOCK as shown below.
• Select "Status" setting from the Parental CTRL menu to
reactivate BLOCK. (See page 30.)
• Select "V-Chip" setting ("MPM", "TV Guidelines", "Can.
English Ratings" or "Can. French Ratings") from the
Parental CTRL to reactivate BLOCK. (See pages 30 to 32.)
Switch off the TV power.
1
2
SmaEtCentral
Press MENU to display MENU screen, and then
press 4/1_ to select "Information".
Press A/T to select "Software Update", and then
press ENTER,
• ifyou have already set the Secret No., go to step 3.
Example
Performing any of the three above will activate the V-CHIP
BLOCK.
Example
Smad
Central
3 Input the 4-digit secret number by using 0--9.
4 Press A/V to select "Manual Update" or "Auto
Update Setting", and then press ENTER.
The operations thereafter vary depending on the setting.
1 Press MENU to display the MENU screen, and then
press 4/11_ to select "Information".
2 Press A/T to select a specific adjuslment item,
and then press ENTER.
3 Press A/Y (or _/1_) to select the desired setting,
and then press ENTER.
4 Press MENU to exit,
The current version of the TV software is displayed.
This is used to upgrade the system software to
enhance the TV functions.
Select the method for manuaWly updating the software.
USB Update: Updates the software using a USB memory
device containing the update file. (See page 33 to 34.)
Network Update: Downloads the update file via the
network and then updates the software. (See page 33.)
• A broadband connection and Intemet Setup are required to
update the software using the network. (See pages 50 to
54.)
• It may take time to access and download the update
depending on the Intemet connection and other factors.
When the TV enter Standby, this function enables the
]V to connect to the network and check for updates
automatically.
Yes: Enables Auto Update Setting.
No: Disables Auto Update Setting.
Q- 32
To Next Page
Loading...
