Using AQUOS LiNK
What's AQUOS LINK?
Using the HDMt CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate
compatible system equipment (Blu-ray disc equipment, AV amplifier, DVD).
By connecting AQUOS UNK compatible devices with HDMI--certified cables to the 'FV, you can control a
recorder or AV amplifier using the remote control of the 'FV.
AQUOS LINK allows you to operate the HDMt--connected equipment with one remote control.
i HDMI-certifiedcable
4
f
,
HDMFcertifiedcable*
ius uTt........
ARC-compatibleequipment.
Opticalfiber cable
4 4
AQUOS LINK-compatible Back panel
Audio system horizontal inputs
Back panel
AQUOS BD Player horizontal inputs
• For connecting the TV to AQUOS LINK-compatible equipment, use commercially available cables.
• Point the remote control toward tile TV, not to connected HDMI equipment.
• Video noise may occur depending on the type of HDMI cable used. Make sure to use an HDMFcertified cable.
• Up to 3 pieces of HDMI recording equipment and one AV amplifier can be connected using this system.
• These operations affect the HDMI equipment seJected as tile current input source. If the equipment does not operate, turn on
the equipment and select the appropriate input source using INPUT.
• The AQUOS LiNK feature may not operate properly when an HDMI splitter or AV selector unit is used.
These devices may cause interruptions to the image and/or sound.
D POWER
DISPLAY (SOURCe}
D_
STB DVD,VCR AUDIO
OPTION SLEEP AUDIO FREEZE
Connected AQUOS LINK-compatible devices can be operated without
changing the settings of the remote control unit.
OPTION button will function only when AQUOS LINK is used.
[] One Touch Play
While the FV is in standby mode, it automatically turns on and plays back the
image from the HDMI source.
[] One Touch Recording
Press ®REC while you are viewing a broadcast received with the AQUOS
LINK-compatible recorder, The AQUOS LiNK automatically recognizes the
connected HDMI device and starts recording.
[] Single remote control
The AQUOS LiNK automatically recognizes the connected HDMI device and
you can control the FV and the devices as if using a universal remote control.
[] Control the AQUOS UNK-compatible audio system
Set the volume of AQUOS LINK-compatible audio system,
@- 43
To Next Page
Loading...
