Watching TV
• 0 0 - "® -
POWER (On/Standby)
POWER
PowR
DISPLAY SOURCE)
CZ3_
[_ STB DVD,VOR AUDIO
c_ czl czl
6
OPTION SLEEP AUDIO FREEZE
m
0
0
0
0
o
0
8
POWER
Press POWER on the TV or on the remote control unit to turn
the power on.
Country
2 Press A/V to select the desired Country listed on the
screen, and then press ENTER.
Time zone
3 Press A/V to select the desired Time zone listed on
the screen, and then press ENTER.
The Initial Installation starts when the TV powers on for the first
time. If the TV has been turned on before, the Initial Installation will
not be invoked. For changing the settings of the Initial Installation,
perform "EZ setup" on the Initial Setup menu on page 28.
Press POWER on the TV or on the remote control unit again
to turn the power off.
° The TV enters standby and the image on the screen disappears.
If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
Weak electric power is still consumed even when the TV is
turned off.
When you turn on the TV for the first time, k will automatically
memorize the broadcasting channels available in the region
where you live. Perform the following steps before you press
POWER on the remote control unk.
1. insert the batteries into the remote control unit. (See page 9.)
2. Connect the antenna cable to the TV. (See page 9.)
3. Hug in the AC cord to the AC outlet. (See page 8.)
Language (Language setting)
Select from among 3 languages: English, French and Spanish.
1 PressA/Y to select the desired language listed on the
screen, and then press ENTER.
"iV Location
Select "Home" or "Store" for the location where you plan
to install the TM. This product qualifies for ENERGY S%AR
in Home mode default setting.
4 Press A/Y to select "Home" or "Store".
Press ENTER to enter the setting.
Home: "Power Saving" is set to "On", and AV MODE is
set to "STANDARD(ENERGY STAR)".
Store: "Power Saving" is set to "Off" and AV MODE is
set to "DYNAMIC (Fixed)".
(_])- 17
To Next Page
Loading...
