Using the Internet
= = = Q
Example
Smart
US£ Cent_aE
1 Press MENU to display the MENU screen, and then
press 4/1_ to select "initial Setup".
2 Press A/T to select "lntemet Setup", and then
press ENTER,
3 Press A/T to select "Network Setup",and then press
ENTER if "interactive Service" is selected "YES".
4 Press 4/1_ to select "Wired" or "Wireless" at
"Connection 7ype",
If your access point supports Wi-Fi Protected Setup
(WPS), it is recommended that you use this function
for the wireless connection. You can press the WPS
button on the access point to configure the settings
automatically,
• The name of the WPS button function may differ depending
on the access point. See the operation manual of the
access point for details.
1 Confirm the current settings in "interface".
• if "Fi_thernet" isselected, press 4/_ to select "Wireless".
2 Press A/T to select "Wireless Setup", and then
press ENTER,
• Confirm the settings, if each setting item is correct,
press MENU to exit.
• ifyou are configuring the wireless setup for the first
time or changing the settings, go to step 3.
If you do not want other people to connect to the
Internet in your absence, you can make settings to
keep the ]V away from the Internet,
1 Press MENU to display the MENU screen, and then
press 4/11_ to select "initial Setup".
2 Press A/y to select "lntemet Setup", and then
press ENTER,
3 Press A/T to select "Interactive Service",
4 Press 4!/_ to select "No", and then press ENTER.
• If you want to allow Internet connection, select "Yes",
and then press ENTER.
5 Press MENU to exit.
@@@
@@@
@@@
@@
[] If you cannot connect to the Internet
Perform the procedures below to check your qV's
network settings,
1 Press EXIT to display the normal TV screen.
2 Press MENU to display the MENU screen, and then
press _1/11_to select "initial Setup".
3 Press A/Y to select "lntemet Setup", and then
press ENTER,
4 Press A/T to select "Network Setup", and then
press ENTER
• Check that numbers are displayed for each setting.
• if there are any settings wkhout numbers, specify the
numbers by following the on-screen instructions.
• For information on how to enter text, see page 53.
Example
5 Press MENU to exit,
This function can be used to display up--to--date
information on the original home page and allow you to
receive support service over the network.
Q- 52
To Next Page
Loading...
