EasyManua.ls Logo

Sharp Aquos LC-50LE650U - Link Operation Menu; Turning On;Off AQUOS LINK-compatible Equipment

Sharp Aquos LC-50LE650U
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Using AQUOS LiNK
[] POWER
DISPLAY <SOL_CE}
{:::3 {:::D
STB DVD'VCRAUDIO
1:::3 1::3 I:_
D
OPTION SLEEP AUDIO FREEZE
D E::) I::_ EZ3
0 Q= _ II =
This function allows easy one--touch recording of the
program being viewed on the FV to AQUOS LINK--
compatible equipment with a recording function by
simply pressing ®REO on the remote control.
Prepare the connected AQUOS LINK-compatible
recorder for recording. Check the following items.
Make sure that the antenna cable is connected.
Check that there is sufficient available space on the
recording media (HDD, DVD, etc.).
On the TV, use "AQUOS LINK Setup" and "Selecting
Recorder" to select the equipment for recording.
By default, the recorder connected to HDMI 1 is selected
for recording.
1 Press ®REC to start recording,
When you are viewing a broadcast received wkh the
AQUOS LINK-compatible recorder selected in "Selecting
Recorder", recording to the AQUOS recorder of the
broadcast being viewed starts.
When you are viewing a broadcast received wkh
equipment other than the AQUOS LiNK-compatible
recorder selected in "Selecting Recorder" or other
external input equipment, pressing OREC on the remote
control does not start recording.
2 Use the Link Operation Menu to stop recording,
(1} Press OPTION to display the Link Operation
Menu screen,
(2} Press A/V to select "Stop Recording", and
then press ENTER,
You can also use the Link OpereJion Menu for
recording on the connected AQUOS LINK-compatibb
equipment,
1 Press OPTION to display the Link Operation Menu
screen,
2 Sebct "Start Recording", and then press ENTER to
start recording,
You can also start recording by pressing ®nEe on the
remote control unit.
3 Sebct "Stop Recording", and then press ENTER to
stop recording,
OPTION SLEEP AUDIO FREEZE
mDD
DDB
You can manually turn on/off the power of connected
AQUOS LiNK--compatible equipment,
1 Press OPTION to display the Link Operation Menu
screen,
2 Press A/V to select "Recorder Power On/Off", and
then press ENTER,
3 Select "On" (or "Off") and press ENTER to turn on
(or off) the equipment,
(_)- 45

Related product manuals