On=Screen Display Menu
• When you select "individual Setup", you can enter the Air/Cable: Make sure what kind of connection is made
4-digk secret number here. See page 30 for setting a
secret number.
3 Press A/V (or _/11_) to select the desired setting,
and then press ENTER.
4 Press MENU to exit,
You can run EZ Setup again, even after setling up the
preset channels.
Language: Select from among 3 languages (English,
French and Spanish).
Location & Time: Make settings for the country,area and
time zone where you use the TV.
Select your country: Select either "US", "Canada"
or "Mexico".
Select your time zone: Select your time zone. The
available settings differ depending on the selected
country.
"IV Location: Select "Home" or "Store" for the location
where you plan to install the TV. This product qualifies
for ENERGY STAR in Home mode defauk setting.
Home: "Power Saving" is set to "Advanced", and AV MODE is
set to "STANDARD(ENERGY STAR)".
Store: "Power Saving" is set to "Oft" and AV MODE is set to
"DYNAMIC (Fixed)".
ENERGY STAR qualmcation is based on AV MODE
"STANDARD(ENERGY STAR)".
Air/Cable: Make sure what kind of connection is made
wkh your TV when selecting "Air" or "Cable".
ON Search: Channel auto search makes the TV look for
all channels viewable in the set area.
If "Cable" is selected tot Antenna setting, scrambled
channels are removed atter the Channel search has been
completed.
Network: When you connect to the Interact on the TV,
cenfi rm the connection method and make adjustments.
• Wireless LAN connection is possible only when the
WPS (push button) method is used. If any other
method is used, make settings by Inkial Setup >
Internet Setup > Network Setup. (See page 52.)
Completed: The settings confirmation screen is displayed.
Confirm the information displayed on the screen.
wkh your TV when selecting "Air" or "Cable".
ON Search: Channel auto search makes the TV look for
all channels viewable in the set area.
CH Memory: You can select the channels to skip in each
ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and
DIGITAL (Cable).
The indicator displayed in blue: Skips channels. (Channel
selection disabled using CH A/V.)
The indicator displayed in gray: Does not skip channels.
(Channel selection enabled using CH/X/V.)
• If no channel is found, confirm the type of connection
made with your TV and try channel search again.
This function allows you to program 4 favorite
channels, in 4 different categories. By setting the
favorite channels in advance, you can select your
favorite channels easily.
To register your favorite channel:
1. Press MENU on the remote control and select
"initial Setup "/"Favorite channels".
2. Press A/Tto select the category that you want to
store your favorite channel.
3. Press _./Tto select your desired channel and
press OK button to confirm.
To delete your favorite channel:
Press _,/Tto select "All data clear" and press OK to
start clearing all favorite channel data.
• While watching, you can toggle the selected channels by
pressing the A, B, C, and D button on the remote control.
You can also select a language from the Initial Setup
menu, Select from among 3 languages: English,
French and Spanish,
• See InitialInstallation on page 17 for setting each item.
• If no channel is found, confirm the type of connection
made with your TV and try "EZ Setup" again.
If Initial Installation does not memorize all the channels
in your region, follow the instructions below to manually
memorize the channels,
Before entering the Individual Setup sub-menu, user has
to key in the password first,After entering the Individual
Setup sub--menu, the user can modify the restricted table.
While exiting the sub--menu, below the Individual Setup
function is activated,
Enter a 4-digit password with the number buttons on the
remote control,
The default password is 0000,
QD- 29
To Next Page
Loading...
