EasyManua.ls Logo

Sharp Aquos LC-65GD1E

Sharp Aquos LC-65GD1E
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
41
Basic adjustment settings (Analogue/Digital)
OPC setting
Automatically adjusts the brightness of the screen.
Press c/d to select “Picture”.
2
Using OPC on the menu screen
Press MENU and the MENU screen displays.
1
Press a/b to select “OPC”.
Press c/d to select “On”.
3
4
Description
The brightness is fixed at the value set in
“Backlight” (see page 40).
Automatically adjusts
Selected item
Off
On
NOTE
When set to “On”, the System senses the surrounding light
and automatically adjusts the backlight brightness. Make
sure no object obstructs the OPC sensor, which could
affect its ability to sense surrounding light.
Using OPC on the remote control unit
Press OPC to switch the Optical Picture Control on
and off.
Advanced picture adjustments
This System provides various advanced functions for
optimising the picture quality.
Press MENU and the MENU screen displays.
1
2
Press c/d to select “Picture”.
3
Press a/b to select “Advanced”, and then
press OK.
4
Press a/b to select a specific adjustment
item.
You can select “C.M.S.-Hue”, “C.M.S.-
Saturation”, “C.M.S.-Value”, “Colour Temp.”,
“Sharpness Enhancement”, “Automatic
Contrast”, “I/P Setting”, “Film Mode”, “3D-Y/C”
or “Monochrome”.
Some items are not selectable depending on
the input mode.
5
Press a/b (or c/d) to select the desired
parameter.
See the table for the selectable parameters.
C.M.S. (Colour Management System)
Colour tone is managed using the six-colour
adjustment setting.
NOTE
For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, and then press OK.
Description
This is a standard to adjust the colour
either more reddish or more bluish in tone.
Increases or decreases the saturation of a
selected colour.
A higher value makes the image brighter.
A lower value makes the image darker.
Selected item
C.M.S.-Hue
C.M.S.-
Saturation
C.M.S.-
Value
Colour temperature
Adjusts the colour temperature to give the best white
image.
Description
White with Bluish tone
White with Reddish tone
Selected item
High
Mid-High
Middle
Mid-Low
Low
LC-65GD1E(E)-f 05.9.21, 7:29 AM41

Table of Contents

Other manuals for Sharp Aquos LC-65GD1E

Related product manuals