6
Preparation
Where to place the System
“System” means the Display and AVC System. First select the location where to place the System.
1
2
Selecting the location of the System
• The Display and the AVC System are connected by the system cable.
(See page 7 for details.)
• Select a place with no direct sunlight and good ventilation.
Setting the System in place
Handling the Display
CAUTION
• When using the TV with the supplied stand attached, do not remove the speaker. Doing so
may disturb the balance leading to product damage or personal injury.
• Do not remove the stand and speaker from the Display unless using an optional bracket to mount
it.
• Keep enough space above and behind the Display.
• When you move the System, carry it by two or more people.
• When you move the Display, hold the rear handle of the Display, not the LCD panel.
Handling the AVC System
CAUTION
• Do not put a VCR or other device on the AVC System.
• Keep enough space above and on the sides of the AVC System.
• Do not block the ventilation openings on the top and left side, and the exhaust fan on the right
side.
• Do not spread a thick cloth beneath the AVC System, or cover it with one, as this can cause
overheating and result in malfunction.
System cable
Display
AVC System
10 cm or
more
5 cm or more
5 cm or more
Keep enough space
There is an exhaust fan
on the right side.
LC-65GD1E(E)-a 05.9.21, 7:19 AM6
To Next Page
Loading...
