55
Using external equipment
AVC System (rear view)
SCART cable
(commercially available)
Connecting a VCR
You can use the INPUT 2 terminal when connecting a
VCR and other audiovisual equipment.
If your VCR supports TV-VCR advanced “AV Link”
systems (see page 56), you can connect the VCR to
the INPUT 2 terminal on the AVC System using the
fully-wired SCART cable.
AVC System (rear view)
VCR Decoder
SCART cable
(commercially available)
Decoder
Connecting a DVD player
You can use the INPUT 3 terminal when connecting to
a DVD player and other audiovisual equipment.
AVC System (rear view) DVD player
Component cable
(commercially available)
SCART cable
(commercially available)
Connecting a game console or camcorder
A game console, camcorder and some other
audiovisual equipment are conveniently connected
using the INPUT 4 terminals.
AVC System (front view)
Game console/
Camcorder
Composite video cable
(commercially available)
S-video cable
(commercially available)
NOTE
• In cases when the decoder needs to receive signal from
the System, make sure to set “Decoder” to “INPUT1” in
the Programme Setup “Manual Adjust” menu. (See page
25.)
NOTE
• TV-VCR advanced “AV Link” systems may not be
compatible with some external sources.
• It is recommended to connect to the INPUT 2 terminal
when using a decoder for ground wave signal input with
a VCR. If INPUT 2 signals preset in auto installation or
programme setup, make sure to set “Decoder” to
“INPUT2” in the Programme Setup “Manual Adjust” menu.
(See page 25.)
Connecting a decoder
You can use the INPUT 1 terminal when connecting a
decoder and other audiovisual equipment.
NOTE
• When using component cable, select “COMPONENT”
from “Input Select” in the menu. (See page 59.)
NOTE
• The S-video terminal has priority over the video terminals.
• You can also connect the game console to INPUT 1 or 3
terminals to enjoy clearer picture.
LC-65GD1E(E)-i 05.9.21, 7:33 AM55
To Next Page
Loading...
