Sharp Aquos LC-65GD1E

60
Useful adjustment settings
Input Label
You can assign each input source a label you like.
Press c/d to select “Setup”.
Press a/b to select “Input Label”, and then
press OK.
Repeat the above until the name is fully spelt
out, and then press OK.
• The name can be 6 characters or less.
• If a label name is less than 6 characters, select
“END”, then press OK.
A
BACK
CLEAR
END
K
U
B
L
V
C
M
W
D
DVD
N
X
E
O
Y
F
P
Z
G
Q
+
H
R
– _
I
S
.
J
T
0123456789
INPUT SOURCE
TV
DTV
INPUT1
INPUT2
DVD
INPUT4
INPUT5INPUT5
CARD
Press a/b/c/d to select each character
of the new name for the input source, and
then press OK.
(Example)
Colour system setting (for TV/AV
input mode)
You can change the colour system to one that is
compatible with the image on the screen.
Press MENU and the MENU screen displays.
1
2
4
3
Press c/d to select “Option”.
Press a/b to select “Colour System”, and
then press OK.
Press a/b to select a compatible video
signal system of your equipment, and then
press OK.
• “NTSC 3.58” cannot be selected in TV tuner
mode.
AUTO
PAL
SECAM
NTSC 3.58
NTSC 4.43
PAL-60
NOTE
• Factory preset value is “AUTO”.
• If “AUTO” is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
• This function is available for AV input mode and TV tuner
mode.
NOTE
• You cannot change labels if the INPUT SOURCE is TV,
DTV or CARD.
6
2
4
3
5
Press b to select the desired input source.
1
Press MENU and the MENU screen displays.
LC-65GD1E(E)-j 05.9.21, 7:34 AM60