Sharp Aquos LC-65GD1E

48
Using memory card
Recording a still image
You can record a still image on the card.
Press E.
1
2
Press d.
3
Press OK to update the still image.
Onion
Tomato
Potato
x 1
x 1
x 1
Still
Cooking Time
Onion
Tomato
Potato
x 1
x 1
x 1
Cooking Time
Still
Still image was captured on a card.
Still
Cooking Time
Cooking Time
• “Still image was captured on a card.” displays.
• Recording may fail depending on the input
signal type or card memory status.
NOTE
Broadcasting types or input signals not available for
recording:
1 DTV broadcasting 4 Copy guarded signal
2 COMPONENT input 5 DVI-I input
3 RGB input
Ejecting the card
• Make sure the card indicator lights up green.
Press EJECT button.
• EJECT button is popped up.
1
2
Press EJECT button again.
• PC card adapter itself pops up.
EJECT button
3
Take out the PC card adapter.
Inserting a PC card adapter
• Press in the EJECT button if it is popped out.
• Insert a memory card to a PC card adapter
beforehand. (See page 46.)
• Insert the PC card adapter slowly.
• CARD indicator lights up green when the card is
inserted.
PC CARD slot
CARD indicator
NOTE
• When “Card is not inserted” is displayed, eject the PC
card adapter, and then insert the PC card adapter slowly
all the way to the end.
• When over a thousand files are in a card, it takes several
minutes to load. (approx. 5 minutes.)
• Even if the green light is on, you can not record on a card
right after you inserted it.
• Make sure the CARD indicator lights green when you take
out a card. Never take out a card when the CARD indicator
lights red. This may damage the card.
Onion
Tomato
Potato
x 1
x 1
x 1
Selecting Still mode
Press CARD and the card mode screen
displays.
1
2
Press c/d to select “Still”, and then press
OK.
• When in CARD mode, press 0-9 or b to
switch either TV or AV input mode.
LC-65GD1E(E)-h 05.9.21, 11:33 AM48