Sharp Aquos LC-65GD1E

76
HOW TO SET THE FACTORY PRESETS
Turn off the Display by pressing Main Power (a).
Press and hold down RESET on the AVC System and press Main Power (a) on the Display to turn on the
System.
All setting items (except TV channel) return to the factory presetting.
NOTE
• Running the factory presetting operation also reset the PIN to the factory preset “1234”.
You can run the Auto Installation again by using the following steps.
1 Turn on the power of the Display and the AVC System.
2 Press MENU. (Make sure the menu screen displays.)
3 Press c/d to select “Setup”.
4 Press a/b to select “Auto Installation”, and then press OK.
5 The PIN setting screen displays, you need to enter the factory preset PIN “1234”.
6 Press c/d to select “Yes”, and then press OK.
4
Rating
5 6 7 8 9 101112131415161718
AGE
Universal
viewing
Parental approval
preferable
X-rated
✓
✓
✓
✓✓✓✓——————————
✓✓✓✓✓✓✓✓✓✓✓✓✓✓
Rating
Universal
viewing
Parental approval
preferable
X-rated
Universal viewing
Parental approval
preferable
X-rated
—
✓
✓
—
✓
—
—
—
——————————————
—
Maturity rating
LC-65GD1E(E)-m 05.9.21, 7:37 AM76