Sharp AR-162

5. Sensor, switch
No. Name Code Function, operation
1 Mirror home position sensor MHPS Detects the mirror (scanner unit) home position.
2 Document size sensor DSIN Paper size detection
3 Toner density sensor TCS Toner quantity detection
4 Paper exit sensor (paper exit side) POD1 Detects paper exit.
5 OC open/close sensor DOC COVER Detects open/close of OC/SPF.
6 Right door switch DSWR Side door open/close detection
7 Paper full sensor P FULL Paper exit tray section full detection <For JOB separator>
8 Lift sensor LFTHP Paper feed tray lift up detection <For JOB separator>
9 Lower limit sensor JTRAY Job separator tray lower limit detection
10 Paper exit sensor (DUP side) PDPX Paper transport detection
11 Shifter home position sensor SFTHP Shifter home position detection (Excluding AR-162)
12 Thermistor RTH Fusing section temperature detection
13 Thermostat Fusing section abnormally high temperature detection
14 1st tray detection switch 1st tray detection
15 Paper in PIN Paper transport detection
16 2nd tray detection switch 2nd tray detection (Excluding AR-162/163)
17 Manual sensor MPED Manual transport detection
18 2nd tray door open/close sensor DRS2 2nd tray door open/close detection (Excluding AR-162/163)
19 2nd tray paper entry sensor PPD2 Paper transport detection (Excluding AR-162/163)
20 1st tray paper empty sensor CSS1 1st tray paper empty detection
21 2nd tray paper empty sensor CSS2 2nd tray paper empty detection (Excluding AR-162/163)
22 Power switch MAIN SW Turns ON/OFF the main power source.
123
6
5
4
7
8
9
10
11
13
14
12
15
16
17
18
19
20
22
21
AR-162 [4] EXTERNAL VIEWS AND INTERNAL STRUCTURES 11/21/2000
AR-162 EXTERNAL VIEWS AND INTERNAL STRUCTURES – 4